Viewing The Programme Schedule; Erasing The Programming; Selecting The Temperature; Activating The Anti-Frost Mode - Rointe M Serie Manual De Instrucciones

. See point 2.6.

2.3.2.2. Viewing the programme schedule

Pressing the key corresponding any of the days of the
week (1 to 7), you can view your programme schedule
for that day. To modify the programming for that day,
press and follow the steps starting from the point
"Programming or changing".

2.3.2.3. Erasing the programming

By pressing for 2 seconds during the edition of
the programme of one or several days, the current
programming will be erased.
If you keep pressing for 10 seconds, then you will
erase all programmes stored in the remote and switch
into Manual function.

2.4. Selecting the temperature

Pressing or in the Manual function you
change the current temperature.
Pressing or in the Automatic function while
editing a programme, we will set the temperature for
the current mode (Eco or Comfort) for that hour and
all the hours set in the same mode.

2.5. Activating the Anti-frost mode

Pressing you activate Anti-frost mode. In this
mode, the fixed and invariable temperature is 8 ºC.
In Manual function , pressing the display will
show 8 ºC and the symbol will appear on the
display.
In Automatic function , pressing we set Anti-
frost mode only for the time intervals with no
programming. You will see the symbol
on the
display.

2.6. Submitting/receiving data

The transfer of data is bidirectional by means of
infrared light. That means you can either send the
data from the remote or receive it from the apparel.
12