Setting Time And Date - Rointe M Serie Manual De Instrucciones

display screen to select between radiators and towel
rails and water heaters:
Press 1 to select the heating mode to programme and
control radiators and towel rails.
Press 2 to select the water heating mode to
programme and control digital water heaters.

2.2. Setting time and date

Before any programming, check if the time and date
are correctly set. If not:
Press and we will see this screen to configure time
and date:
Press . The hour will blink. Press
hour.
Press again. The minutes will blink. Use
adjust the minutes.
Press again. The day (1 to 7) will blink in the
display. Press
the current day of the week.
Finish by pressing
you do not press a button in 5 seconds, you will finish
the operation. The changes made will be stored in the
remote.
SELECT
1
2
or or one of the 1 to 7 key to set
again. If, when changing a value,
or set the
or to
9