Installation; Hdmi Or Vga Input Connection; Connecting The Power And Video Signal Cables; Turning On The Equipment - Qian QM201901 Manual De Usuario

2. INSTALLATION

1 HDMI
Port
1 VGA
Port
1. 1 VGA Port: Connect the VGA Signal Output Socket
2. 1 HDMI Port: Connect the HDMI Signal Output Socket
3. Power Input: Connect the Input of the Power Adapter to the Monitor

2.1 HDMI or VGA Input Connection

Connect the equipment cable to your monitor through the HDMI or VGA cable
(depending on the case).

2.2 Connecting the Power and Video Signal Cables

Before connecting the monitor through the power and video signal cables, it is
recommended to turn off your equipment (PC). Insert the corresponding cables,
the power cable to the power supply, and the video signal cable to the VGA or
HDMI port (depending on the case) to the video card of the computer, make sure
that in any case the cables are firmly connected

2.3 Turning on the Equipment

Turn on the monitor and the computer, the LED indicator turns blue or green
depending on the case, when the connection and operation is normal, if the
connector turns red, please check the video cable connection.
Power
Input
27