Operation; Osd Button - Qian QM201901 Manual De Usuario

3. Operation

3. Operation

3.1 OSD Button

(1) Power Switch
Digital control light-touch-switch, used for turning on or off monitor power.
(2) Power indicator
When the monitor is under normal working condition, the indicator will light
green (or blue); If the monitor is under saving mode, the indicator light red or
off. And the indicator will turn off under the power off mode. (When the
power indicator is off, it means that the monitor is under off mode, please
disconnect the power cable when the monitor is not used for safety
purpose.)
(3) AUTO Button
Auto adjust / exit
(4) - Button
Select and adjust the OSD items(Decreasing the value)
(5) Menu Button
Activate OSD, enter sub menu, select items, confirm selection
(6) + Button
Select and adjust the OSD items (Increase the value)
MENU Adjustement setting:
1. Press Menu into Main Function choice Menu
2. Press + or - to switch the image of Main Function changing settings
3. Press Menu to switch to sub-menu changing setting and
to Press + or - into this Menu.
1. Press + or - to adjust the setting
2. Press AUTO to return back to Main Menu
3.2 (1) OSD menu and operation menu introduction
Press MENU to access the OSD menu (main menu), see the following image:
29