En - Some Notions Before Using The Quadrat Relax - ZUCCHETTI KOS Quadrat Relax Manual De Instalación, Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71

EN - SOME NOTIONS BEFORE USING THE QUADRAT RELAX

HOW TO GET A HYDROMASSAGE
To get the best benefits, have a hydromassage 3 times a week
maximum.
Before getting into the Quadrat Relax, have a quick shower to
remove any greasy substances (i.e. sweat, body creams, etc.) that
may contaminate the water.
Take off any pendants and gather your hair to prevent it from get-
ting entangled in any mobile parts.
Check with a hand if the water of the Quadrat Relax is pleasant and
immerse yourself slowly and carefully since the floor and Quadrat
Relax itself may be slippery.
Bathing in the Quadrat Relax should not last longer than 10
minutes.
Prolonged immersion in hot water can cause HYPERTHER-
MIA, that is excessive body temperature. The consequenc-
es of this state can be torpor, increase of the body tem-
perature, fainting, damages to the foetus in pregnant women and
unconsciousness with the consequent risk of drowning.
RECOMMENDED TEMPERATURES
The temperature of the water depends on personal preference
and the effect you wish to obtain:
Revitalizing effect: the temperature of the water must be set at
33°C (maximum 10 minutes in the Quadrat Relax). If you wish to use
the chromotherapy function, the best colours are yellow and red.
Quadrat Relaxing and draining effect: the temperature of the
water must be set at 35-37°C (limit time in the Quadrat Relax to
maximum 10 minutes). If you wish to use the chromotherapy func-
tion, blue and green are the recommended colours.
WHICH PRODUCTS TO USE
Use products suitable for Quadrat Relaxs, that can be easily found
in specialized shops.
DO NOT use foaming detergents, soaps, greasy lotions and in general
products not compatible with the Quadrat Relax materials.
Alternatively, you can use a moderate quantity of bath salts and
natural essences (i.e. lavender or neroli oils, etc.), making sure that
the product formulation is suitable to Quadrat Relaxs.
If, after using the products, the water should be cloudy or foamy,
change it and clean the walls of the Quadrat Relax; then try and use
a different product or use less of it.
QUADRAT RELAX CONTROLS
It is possible to control the Quadrat Relax via the remote control
supplied, a control inside the bath or an internal keypad (accessible
only from the inspection compartment): in this last case, set the
main values before getting into the water.
As to the use specifications, see the following pages.
3 6
3
3
3
3
3
3 6
36
36
3
3 6
36
3
36
3
36
3 6
3 6
3
3 6
3
3
3
36
3
3
36
6
6
6
Quadrat Relax

Publicidad

Tabla de contenido
loading

Tabla de contenido