Yamaha HY128-MD Manual De Instrucciones página 11

SPLIT ON/OFF
Select whether the input signals should be split for sending to output
connectors. The send destination is the output connector on the same
system.
SW701
3 (MADI 1)
4 (MADI 2)
OFF Do not split input signals (default setting)
ON Split input signals when sending them to output connectors
INPUT RATE
Select whether to process MADI input signals at an input rate of 1Fs, 2Fs or
4Fs.
NOTE
When "2Fs" is selected, this card will automatically detect the MADI input signal frame
rate (48k frame or 96k frame).
SW702
1 (MADI 1) 2 (MADI 1)
3 (MADI 2) 4 (MADI 2)
OFF OFF
ON OFF
OFF ON
ON ON
Input SRC ON/OFF
Select whether to turn SRC on or off for MADI input signals.
SW703
1 (MADI 1)
2 (MADI 2)
OFF SRC off (default setting)
The same clock must be supplied for both the device on which this card is
installed and the MADI-compatible device connected to the input side.
ON SRC on
Syncs the input MADI signal to the device's clock on which this card is
installed.
Settings
1Fs, 44.1 kHz/48 kHz, maximum 64 ch (default setting)
2Fs, 88.2 kHz/96 kHz, maximum 32 ch
4Fs, 176.4 kHz/192 kHz, maximum 16 ch
Not in use (1Fs)
Settings
Settings
HY128-MD Owner's Manual
11