Yamaha HY128-MD Manual De Instrucciones página 9

3 COAXIAL 1 IN/OUT connectors
COAXIAL 2 IN/OUT connectors
These are BNC connectors used for connecting MADI-compatible devices.
Each connector can input or output audio signals, up to a maximum of
64 channels.
NOTE
Cables of up to 100 meters (theoretical value) can be used.
4 WCLK IN FOR SRC connector
This is a BNC connector used to directly input the word clock signal for the
SRC. The indicator will turn on when a valid word clock input is detected,
and will flash when the word clock input is invalid.
5 Software Control
This switch selects whether to change the HY128-MD settings with a control
surface or the DIP switches.
SW251 (SOFT CTRL)
ON (Enable)
OFF (Disable)
5
For changing the settings with the control surface (default setting)
For changing the settings with the DIP switches on the card
6
Settings
HY128-MD Owner's Manual
9