Straightening Hair - Silvercrest SHG 32 B1 Instrucciones De Uso

Straightening hair

1) Prepare the hair as described in "Before straightening".
2) Start with the lower sections of hair at the back of your head. Work around
the sides to the front. Take a strand with a width of approximately 2 cm and
hold its end tightly between your index and middle finger of the hand that is
not holding the hair straightener.
► Ensure that the hotplates
operation, touch the appliance only on the handles. Risk of burns!
3) Clamp the strand near the root between the hotplates
together.
4) Pull the entire strand through the hotplates
quickly downwards from the root to the tips.
5) Proceed in the same way for every strand.
6) Once you have straightened all the strands, switch the appliance off and pull
the power plug from the mains power socket.
7) Allow the appliance to cool down completely.
8) Press the hotplates
SHG 32 B1
WARNING! RISK OF INJURY!
together and push the catch
do not touch your scalp. Risk of burns! During
by pulling the hair straightener
and press them
back in.
GB │ MT │ 17 ■