Cutting - Kamikaze KV 100 Manual De Uso

ElEctrical PolE PrunEr
If you want to change the small open size into big size, repeat the procedure
above. When you stop working, please press the trigger and maintain 3
seconds unchanged then the blade will keep closed state. Then turn off the
power switch and pull out the cable from the battery.

14. cutting

Wear suitable work clothes such as boots with non-slip soles, sturdy
long trousers, gloves and goggles.
Wear protection gloves.
Wear eye protection.
Risk of cutting and severe injuries.
• When ready to cut, place the blade on the branch to be cut and press
the trigger.
• When operating the tool, keep the other hand and any other part of your
body at a minimum distance of 15cm from the blade.
• Keep all other people at a minimum distance of 1.5m.
• Blade will be hurt or jammed if cutting bigger branch forcedly.
• Don't move the tool during the pruning shear cutting, it can cause danger.
• Use sleeve to fix the wire of device avoid wire be draw by branch, that's
will cause risk in working.
• Don't use the device in rain or humidity environment.
• During storage of the device after use, take off wire from battery and
pruning, shut up power switch before storage.
CAUTION
Please check battery charge level or blade sharpening when cutting
is difficult or not smooth.
71
www.kamikazevolpi.com