Switching Af/Mf; Using The Tripod Mount - Panasonic S-E70200 Instrucciones De Funcionamiento

∫ Notes on using the teleconverter
A teleconverter (DMW-STC14/DMW-STC20: optional)
0
can be used with this lens.
Refer to the website for the most current information
0
regarding supported teleconverters.
Do not use other than the supported teleconverters.
0
Doing so may cause damage or a deterioration in
performance to the lens or teleconverter.

Switching AF/MF

Switch AF/MF by sliding the
focus ring A forwards or
backwards (focus clutch
mechanism).
When the digital camera is
0
set to MF, the operation will
be MF irrespective of the
position of the focus ring.
Check the distance scale B
0
when using MF. Use it as a
guide for focusing.
You can set the amount that
0
the focus moves with the
focus ring using menu
settings in compatible digital
cameras. Switch the lens to
AF and set the digital camera to MF. Refer to the
operating instructions for the digital camera for details.
26
DVQX1999
(ENG)
When using a tripod, attach it
to the tripod mount of the
lens.
0
AF MF
∫ Changing the vertical/horizontal orientation
This way, you can quickly switch between the vertical
and horizontal orientation of the digital camera while the
tripod is in use.
1


3.2 4 5 7 13 28 ft
m
0.95 1.2 1.5 2.2 4 10

Using the Tripod Mount

When a tripod is attached to
the tripod mount of the
digital camera, damage to
the lens may result when
carrying.
Rotate the tripod mount
locking knob in the
direction indicated by the
arrow to loosen.