Attaching The Lens - Panasonic S-E70200 Instrucciones De Funcionamiento

8
O.I.S. switch
You can use the image stabilizer function to match
the recording method.
[MODE1]: Image stabilizer suited to normal
recording
[MODE2]: Image stabilizer suited to panning (the
panning direction is automatically
detected and compensated)
[OFF]: The image stabilizer does not work.
We recommend setting the O.I.S. switch to [OFF]
0
when using a tripod.
9
Lens mount rubber
10
Lens fitting mark
11
Contact points
Note
There may be differences in focus when you use zoom
0
after focusing. Focus again.
While shooting video, in some situations, AF operation
0
and stabilizer operation of the lens may be heard. It is
recommended to record as follows:
– Set to MF to record
– Turn off the image stabilizer and use a tripod for
recording
24
DVQX1999
(ENG)

Attaching the Lens

For information on how to attach the lens, refer to the
operating instructions for your digital camera.
Attach the lens after turning off the digital camera.
0
Attach the lens after removing
0
the lens rear cap.
After removing the lens from
0
the digital camera, be sure to
attach the lens cap and lens
rear cap to prevent dust and
other particles from
accumulating on or entering
the lens.
∫ Attaching the lens hood
Hold the lens hood with your fingers
placed as shown in the picture.
Do not hold the lens hood in a way
0
that twists or bends it.

