Technical Specifications; Intended Use - IKRA GBS 8050 LI EX Instrucciones De Manejo

Accu- Grass- und Shrub shear
Dear customer,
We have created this instruction manual for you in order to ensure the reliable operation of your clippers. By following
the instructions, your machine will always work to your satisfaction and we can guarantee its long lifetime.
Our machines were tested under extremely severe conditions prior to production. They were also subjected to
continuous testing during production. This series of tests guarantees the consumer a high quality product.
Design and performance are subject to change, without prior notice, due to improvements.

Technical Specifications

Model
Battery voltage/operation voltage
Battery type
Charging current
Charging time
Operating time
Cutting movements
Cutting width *
Cutting length **
Cutting thickness **
Noise pressure level as per (DIN EN 60745-2-15)
Vibrations (DIN EN 60745-2-15)
The machines comply with the safety class III.
Technical changes are reserved.
* Grass trimmer ** Shrub trimmer
Attention: Noise protection! Please observe the local regulations when operating your device

Intended use

Application note:
The battery-powered grass and shrub shear can not and should not replace your hedge shears.
They are exclusively designed to trim and cut back ornamental shrubs and brushwood with a low wood
thickness. Any other use is not deemed appropriate and the manufacturer/ supplier is not liable for dama-
ges resulting from such use.
If required, the shrub trimmer may be easily turned into a grass trimmer by replacing the assembled shea-
ring blade with the one provided with your package.
GB | Operating Instruction
1
GBS 8050 LI EX
V/DC 3,6
lithium-ion 1,5 Ah; 5,4 Wh
mA 400
h approx. 6 hours
min. approx. 40
min 1000 * / 2000 **
-1
mm 70
mm 160
mm 8
dB (A) 73
K=3,0 dB (A)
m/s < 2,5
2
K=1,5 m/s
Translation of the original Operating Instructions
2