Descargar Imprimir esta página

ASROCK PV530-ITX Manual Del Usuario página 14

Publicidad

A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
need to connect them for AC'97 audio panel.
System Panel Header
(9-pin PANEL1)
(see p.2 No. 8)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.2 No. 9)
Chassis Fan Connector
(4-pin CHA_FAN1)
(see p.2 No. 2)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.2 No. 20)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.2, No. 7)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
1 4
1 4
1 4
1 4
1 4
1
2
3
4
12
24
1
13
20-Pin ATX Power Supply Installation
ASRock PV530-ITX Motherboard
This header accommodates
several system front panel
functions.
Please connect the chassis
speaker to this header.
Please connect a CPU fan cable
to this connector and match
the black wire to the ground pin.
Please connect a CPU fan cable
to this connector and match
the black wire to the ground pin.
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
supply to this connector.
12
1
24
13

Publicidad

loading