Tabla de contenido
Publicidad
2.
ASSEMBLY INSTRUCTIONS
When unpacking the machine check carefully for damaged or broken parts. If you find any damaged or
faulty parts, please contact Rubi after-sales service to receive original replacement parts.
SAFETY:
•
WARNING! Read all of the safety warnings and all of the instructions.
•
Keep the work area clean and well lit.
•
Do not use electric tools when you are tired or under the influence of alcohol, drugs or medication.
•
Use personal safety equipment. Always wear eye protection.
•
Store the tool out of reach of children when not in use and do not allow people who are not
familiarized with the tools and have them read this operator's manual prior to handling the tool.
•
WARNING! Do not use the machine for other uses than those for which it was designed.
CLEANING AND MAINTENACE:
•
Proper cleaning and maintenance of the machine can extend its lifetime.
•
Clean the machine immediately after use, as well as during prolonged periods of inactivity.
•
Do not lubricate the guides with oil. Use of oil will cause eventual gumming and sticking of the
movable parts as the oil combines with dirt and ceramic tile dust. We recommend cleaning the
guides with a soft dry cotton cloth after each use.
•
Brush away all scraps "with soft bristled brush" from the base of the cutter before making the next
cut.
STORAGE
•
Store the tool in its packaging in a cool, dry place protected against cold and direct sunlight.
•
The machine must be put out of service and dismantled in accordance with the instructions in each
country, at a selective collection point for the proper classification and processing of the materials.
AFTER-SALES SERVICE
Use only original spare parts offered by the manufacturer. Repairs should only be done by certified
workshops or RUBI's technical service:
RUBI TOOLS USA Inc.
10813 NW 30th Street, Suite 110
DORAL, FL 33172
Tel. 1 305 715 9892
Fax. 1 305 715 9898
English
TRANSLATION OF THE ORIGINAL
Publicidad
Tabla de contenido
