Publicidad
Idiomas disponibles
Idiomas disponibles
Down rod, Canopy, Coupling
1) Select the right down rod depending on the height of your ceiling
2) If neither of the down rods fits, contact your fan distributor
3) Remove the locking pin, the two screws off the coupler.
4) Place the down rod through the canopy, and route the electrical cables through the extension.
5) Insert the extension into the coupler, insert the coupling screws and the pin, tighten the two screws on the coupler and close with the
cover
Blades__
___________
1) Fix the blades to the motor with two screws.
2) Repeated the operation for each blade.
The fan must be mounted at least 2.30 meters above the floor.
Connect the down rod to the coupler.
Cover______
___________ _
_______
_ ________
Publicidad
