Avigilon 8.0MP-HD-DOME-360 Guia De Instalacion página 3

Ocultar thumbs Ver también para 8.0MP-HD-DOME-360:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Any external power supply connected to this product may
only be connected to another Avigilon product of the same
model series. External power connections must be
properly insulated.
Do not connect directly to mains power for any reason.
Caution —
may result in injury or damage to the dome camera.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other sources of heat.
Do not subject the cables to excessive stress, heavy loads
or pinching.
Do not open or disassemble the device. There are no user
serviceable parts.
Refer all servicing to qualified personnel.
Servicing may be required when the device has been
damaged (such as from a liquid spill or fallen objects), has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not use strong or abrasive detergents when cleaning
the device body.
Use only accessories recommended by Avigilon.
Avoid leaving the image sensor exposed for extended
periods of time. Always cover the image sensor with either
a lens or a dust cap.
Do not allow dust, moisture or any other foreign debris to
enter the lens mount.
Never touch any glass elements inside the lens mount.
Do not point the lens directly at the sun or other extremely
bright objects or damage to the image sensor may occur.
Use of controls or adjustments or performance of
procedures other than those specified in this document
may result in hazardous radiation exposure.
ii
Failure to observe the following instructions

Publicidad

Tabla de contenido
loading

Tabla de contenido