Anchor Outdoor Unit - AUX ASW-JA Instrucciones

Step 3: Anchor outdoor unit
The outdoor unit can be anchored
to the ground or to a wall-mounted
bracket.
UNIT MOUNTING DIMENSIONS
The following is a list of different
outdoor unit sizes and the distance
between their mounting feet.
Prepare the installation base of the
unit according to the dimensions
below.
Model
09
12
18
24
If you will install the unit on the ground or
on a concrete mounting platform, do the
following:
1. Mark the positions for four expansion bolts
based on dimensions in the Unit Mounting
Dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Clean concrete dust away from holes.
4. Place a nut on the end of each expansion bolt.
5. Hammer expansion bolts into the pre-drilled
holes.
H
D
Outdoor Unit Dimensions
C (mm)
W x H x D (mm)
723 x 546 x 260
723 x 546 x 260
805 x 545 x 315
895 x 700 x 350
6. Remove the nuts from expansion bolts, and
7. Put washer on each expansion bolt, then
8. Using a wrench, tighten each nut until snug.
WHEN DRILLING INTO CONCRETE, EYE
PROTECTION IS RECOMMENDED AT ALL
TIMES.
90
C
W
A
Mounting Dimensions
A (mm)
800
539
800
539
546
882
632
972
place outdoor unit on bolts.
replace the nuts.
WARNING
B
Fig. 4.5
B (mm)
285
285
325
355