Hotel Mode - Nevir NVR-7062 TTGHD-19 Manual De Instrucciones

1. Press the "MENU" button to enter the OSD menu. Then press " / " button to select the
"LOCK" menu. Enter the "LOCK" menu by pressing " " button. The default password is
"0000". The administrator password is "8899".
2. Press " / " button to select "hotel" and
press the " " button or "ENTER" button to
enter to Hotel Mode .
a ) Press " / " button to select "Hotel Lock"
and press the " / " button to open or close the
hotel lock function .
b ) Press " / " button to select "Lock
Channel" and press the " / " button to open or
close the lock channel function .
c ) Press " / " button to select "Set Source"
and press the " / " button to select source
which you desire.
d ) Press " / " button to select "Channel Number" and press the " / " button to select
channel which you desire.
e ) Press " / " button to select "Picture Lock" and press the " / " button to open or close the
picture lock function .
f ) Press " / " button to select "Key Lock"
and press the " / " button to open or close
the key lock function .
g ) Press " / " button to select "Max
Volume" and press the " / " button to select
the max volume .
h ) Press " / " button to select "Source
Lock" and press the "ENTER" button to
enter .Press
" / " button to choice you want to turn on or
turn off the signal source.
j ) Press " / " button to select "Clear
Lock" and press "ENTER" button to return to
factory settings.

Hotel Mode

2-23