Crown CT15134-165 Manual Original página 28

Similar results can be reached by attach-
ing a board to a work part with screw
clamps and using such board as a second-
ary limit stop. Perform sawing by moving
power tool along the limit stop while pressing the
side of base plate 24 to the side of the board (see
fig. 14.2).
Cutting with guide rail (see fig. 2, 15)
The guide rail 29 makes it possible to perform straight
cuts with great accuracy� The guide rail 29 has special
rubber edges that prevent chipping and pulling the
material out of the work piece at the edges of the cut� The
teeth of the saw blade 12 shall adjoin the rubber edge�
• Mount the power tool on the guide rail 29 as de-
scribed above (see fig. 2).
• Fix the guide rail 29 on the work piece using, for
example, clamps (see fig. 15).
• Perform the operation as described above (see fig. 15).
Power tool maintenance / preventive
measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
The manufacturer reserves the possibility to introduce changes.
flush the power tool with compressed air thought the
ventilation slots 25�
After-sales service and application service
Our after-sales service responds to your questions con-
cerning maintenance and repair of your product as well
as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�
Environmental protection
Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging
should be sorted for environment-friendly
recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
28