Recess Mounting Only - Glacier bay SP-4452 Guía De Uso Y Cuidado

Installation - Recess Mounting only
1b
Cut away the drywall
NOTE: For recess mount, do not install side mirrors and
brackets.
□ Cut away the drywall. The rough opening dimension is
12-5/8in x 16-3/4in x 3in.
16-3/4in
3b
Assembling the recess frame
□ Examine the frame pieces, cabinet, and your wall
required.
□ Attach the top and bottom recess frames (NN) to the
hinge side frame (LL) and the open side frame (MM)
around the cabinet (C), using the 1 in. Phillips head
screws (OO).
NN
LL
12-5/8in
MM
NN
2b
Frame out the wall cavity
□ Mark the opening size of the framing.
□ Construct rough opening as illustrated.
4b
Mounting the cabinet into a recess
□ Insert cabinet into rough opening and make sure cabinet
is level and plumb. (Use wood shims as required)
□ Secure both sides of the cabinet at the designated
mounting hole locations
□ Use 1.5 inch long screws (GG) and clear washers (EE) as
shown in illustration.
□ Snap the caps (DD) as illustrated below.
EE GG DD
7
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM/GLACIERBAY