Sony CDP-CE535 Manual De Instrucciones página 19

To
You need to
Pause
Press P
Stop play
Press p
Locate a disc while
Turn ≠
the second player is
display shows the disc number
set to Continuous
you want, then push
Play mode
≠
Locate a track
Press 0 (–AMS+) ) until the
display shows the track number
you want
• To do other operations, use the controls on the second
player or the supplied remote.
• The AMS buttons (=/+) and search buttons
(0/)) on the remote operate the second player as
indicated on the remote.
To control the second player directly using the supplied
remote
Set CD 1/2/3 on the remote to CD 3 which is the same
position as the COMMAND MODE selector on the rear panel
of the second player.
To control this player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control this player.
Notes
• You cannot locate a particular point in a track of the second
player using the controls on this player.
• Some controls on this player work on the second player
differently from they do to this player.
Loading the Disc Memos of the second CD
player
If the second CD player has the Disc Memo function
(see page 24), you can load the Disc Memos of the
second CD player to this player's memory and display
them on this player.
1
Press INPUT.
2
Turn ≠ AMS ± until "LOADING MEMO"
appears in the display.
ALL DISCS
1 2 3
DISC TRACK MIN
L O A D I N G M E M O
AMS
± until the
(DISC)
AMS
±
(DISC)
4 5 1 2 3 4 5
6 7 8 9 10
SEC
CD1
3
Push ≠ AMS ±.
This player starts loading. (Loading takes about
one minute.)
Note
If each Disc Memo of the second CD player has more than 12
characters, the first 12 characters of each are loaded to this
player.
Labeling discs of the second CD player
You can label discs of the second CD player or change
the Disc Memos loaded from the second CD player.
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2
Press CONTINUE.
3
AMS
Turn ≠ ± to select the disc you want,
(DISC)
AMS
then push ≠ ±.
(DISC)
4
Press INPUT.
5
AMS
Turn ≠ ± until " DISC MEMO"
(DISC)
appears in the display, then push ≠
6
Input the new Disc Memo following the procedure
in "Labeling Discs" on pages 24 to 26.
Note
The new Disc Memos are stored on this player's memory, so
you cannot display them on the second CD player.
Playing CDs Playing CDs
AMS
±.
(DISC)
19
GB