Control Panel Description - Apex XT Sense Manual Del Usuario

XT Sense / English
4. Operation
NOTE: Always read the operating instruction before use.

4.1 Control Panel Description

Buttons arrangement on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the
press the
Therapy Pressure
MENU
Press the
adjustment setting includes mode selection, ramp time selection, ramp starting
pressure, therapy pressure adjustment, alarm ON/OFF, clock alarm and clock setting,
compliance meter, and total operating meter. When each setting's value has been
changed, press
selection. Please refer to 4.2 Function Description section for detailed information.
UP
Press the
DOWN
Press the
"START/STANDBY"
button again. The display will switch between
[ XX.X cmH O]
2
"MENU"
button to enter the setting mode when device is in standby mode. The
"MENU"
for confirmation and press
"UP" button to increase the value.
"DOWN"
button to decrease the value.
"START/STANDBY"
in cmH O unit.
2
button. To stop the treatment,
[STANDBY]
"MENU"
again for next setting
7
and