Maintenance And Repairs; Disposal - Stihl HL 56 K Manual De Instrucciones

Engine power to ISO 0.8 kW (1.1 bhp)
8893: at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed
(rated): 10,000 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm (0.02 in)
Fuel System
Fuel tank capacity: 340 cc (11.5 fl.oz)
Weight
Dry weight with 0° gearbox, 500 mm
(20 in), with cutter guard
HL 56 K: 5.7 kg (12.6 lbs)
Cutting blades
Type: Double-edged for
bidirectional
cutting
Cutting length: 500 mm (20 in)
Tooth spacing: 34 mm (1.34 in)
Tooth height: 22 mm (0.87 in)
Sharpening angle: 45° to horizontal
HL 56 K

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
English
29