Control Panel; Remote Control - Danby DTAC100F1WDB Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Display Panel: Displays the set temperature, the
ambient temperature and the timer settings. To
change the temperature scale being displayed,
press the up and down buttons at the same time.
2. Remote control receiver
3. Filter Button: The indicator light will illuminate
as a reminder to check the fi lter. Once the fi lter
has been cleaned, press this button to resume
normal operation.
4. Mode Button: Used to choose the operating
mode: cool, fan, dry and auto.
5. Fan Button: Used to set the fan speed: low,
medium and high.
6. Energy Saver Button: Used to set the energy
saver function.
7. Sleep Button: Used to set the sleep function.
8. Up and Down Arrows: Used to adjust the set
temperature and the timer function.
9. Timer Button: Used to set the auto on and auto
off timer.
10. Power Button: Used to turn the appliance on or
off.
1
2
6
4
5
7
3
9
8
10

REMOTE CONTROL

1. Mode Button: Used to choose the operating
mode: cool, fan, dry and auto.
2. Up and Down Arrows: Used to adjust the set
temperature and the timer function.
3. Sleep Button: Used to set the sleep function.
4. Power Button: Used to turn the appliance on or
off.
5. Fan Buttons: Used to set the fan speed: low,
medium and high.
6. Lock Button: Press this button to lock the remote
control and prevent the settings from being
inadvertently changed.
7. Energy Saver Button: Used to set the energy
saver function.
8. Timer Button: Used to set the auto on and auto
off timer.
9. °C/°F Button: Used to change the temperature
scale displayed.
10. Follow Me Button: Used to set the Follow Me
function.
1
5
6
5
2
3
4
7
8
9
10