Control Panel - Danby DAC150BGUWDB Manual Del Propietário

OPERATING INSTRUCTIONS
FEATURES

1. Control Panel

2. Air Inlet
3. Air Outlet
4. Air Filter (not pictured)
CONTROL PANEL
1. Ionizer Button: Used to set the ionizer function.
2. Energy Saver Button: Used to set the energy
saver function.
3. Display Screen and Up and Down Buttons:
• Display screen shows the set temperature, the
ambient temperature and the timer settings.
To change the temperature scale being
displayed, press the up and down buttons at
the same time.
• Up and Down Buttons are used to adjust the
set temperature and the timer function.
4. Sleep Button: Used to set the Sleep function.
5. Filter Button: The indicator light will illuminate
as a reminder to check the fi lter. Once the fi lter
has been cleaned, use this button to resume
operation.
1
6. Mode Button: Used to choose the operating
7. Timer Button: Used to set the auto on and auto
8. Fan Button: Used to set the fan speed. The fan
9. Follow Me indicator: Light will illuminate to
10. Power Button: Used to turn the appliance on or
11. Remote Control Receiver: Ensure this receiver
2
3
6
7
9
1
2
mode.
off timer.
can be set to Low, Medium, High and Auto.
indicate that the Follow Me feature is active.
off.
is not obscured by curtains or other items as it
could impact remote control functioning.
4
5
9
8
3
10
11