Timer Function; Auto Off Function - Danby DAC080BHUWDB Manual Del Propietário

OPERATING INSTRUCTIONS

Timer Function

The Timer Function can be used to turn the
appliance on or off after a set period of time.
Auto On Function
1. Press the Timer Button once and the Auto On
indicator light will illuminate.
2. Use the Up and Down Arrows to select the
desired amount of time before the appliance
should turn on. The Up and Down Arrows will
add or subtract time in 30 minute increments up
to 10 hours and then in 1 hour increments up to
24 hours.
3. Use the Mode Button to select the desired mode.
4. Use the Fan Button to select the desired fan
speed.
5. The time selected will appear on the display
panel and will count down until the appliance
turns on.

Auto Off Function

1. Press the Timer Button twice and the Auto Off
indicator light will illuminate.
2. Use the Up and Down Arrows to select the
desired amount of time before the appliance
should turn off. The Up and Down Arrows will
add or subtract time in 30 minute increments up
to 10 hours and then in 1 hour increments up to
24 hours.
3. The time selected will appear on the display
panel and will count down until the appliance
turns off.
Using Auto On and Auto Off Simultaneously
The Auto On and Auto Off functions can be used at
the same time by setting fi rst one and then the other.
Both indicator lights will illuminate and the display
will count down to the appliance either turning off
or on, whichever function was set fi rst.
Note: The timer will not cycle the appliance on and
off indefi nitely. The Auto On and Auto Off timers
will function one time and then the appliance will
return to regular functioning.
Turning the appliance off, pressing the default
button on the remote or unplugging the appliance
will clear all memory settings, including the timer.
8