Tabla De Contenido; Appliance Names And Functions; Vacuum Packing With Magic Vac - Magic Vac Genius Instrucciones De Uso

Ocultar thumbs Ver también para Genius:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
THE VACUUM PACKING SYSTEM FOR THE HOME
We compliment you on your purchase and thank you for your confidence in us. You are advised to carefully
read these directions, which will enable you to use the Mod. MAGIC VAC Genius properly and obtain optimal
results in terms of food preservation. Furthermore, we suggest you keep these instructions handy for further
SECTION 1
bags cut from a
®
roll or pre-cut bags
®
Family containers
®

APPLIANCE NAMES and FUNCTIONS

See illustrations on page 1.
(1) START/STOP/MAN SEAL switch - Performs
the following operations:
• START - the appliance is turned on;
• STOP - the appliance is turned off;
• MAN SEAL - the sealing process is started at
any time.
(2) ON/VACUUM/SEAL indicator light - Shows
the appliance status:
• Green (ON) - the appliance is performing the
vacuum packing cycle;
• Yellow (VACUUM) - the MAX vacuum level has
been reached;
• Red (SEAL) - the appliance is performing the
sealing process.
(3) Tube air inlet - To insert the connection tube
to jars, containers, universal caps, bottle caps
etc.
(4) Lid manual valve - Press it to open the lid at
the end of the cycle.
(5) Lid - Opening the lid into the fixed raised posi-
tion allows you to position the bags before
starting the vacuum packing process.
Mod. MAGIC VAC Genius
PATENTED
reference.
CONTENTS
- INFORMATION ON VACUUM
page 15
page 16-17
page 18-19
®
page 18
page 18
®
page 18
®
page 18-19
page 19
page 19
page 19
page 20
page 20
page 21
15
SECTION 2
PRESERVATION OF FOODSTUFFS page 22-26
®
®
AVAILABLE
®
ACCESSORIES
(6) Vacuum locks - In the locked position they
secure the lid in place while the vacuum pack-
ing cycle is under way in bags, jars and contain-
ers; they release automatically.
(7) Sealing gasket - It presses the bag on the seal-
ing bar.
(8) Airtight gaskets - They guarantee that a vac-
uum will be maintained in the chamber, thus
allowing air to be removed from bags and
containers.
(9) Sealing bar - Teflon-coated heating element
that seals the bag and prevents it from sticking
to the bar.
(10) Tray-shaped vacuum chamber - To position
the open end of the bag inside the chamber,
draw air from the bag and collect any excess
liquid.
(11) Non-slip feet - The feet prevent the appliance
from slipping during use.
®
page 22
page 23
®
page 24
page 24-25
page 25
page 26
page 75-76

Publicidad

Tabla de contenido
loading

Tabla de contenido