Steren BAF-1287 Manual De Instrucciones página 27

Make all initial connections with the power switches OFF on all devices. Make sure
volume levels are all the way down, you can adjust them later.
1. Connect the power cable to the electric outlet and connect
the other end of the power cable to the speaker.
3. Use the RCA line in input jacks in order to connect a CD,
MP3, DVD, mixer or other type of audio device.
To avoid damages in the BAF-1287, BAF-1287BT and
to obtain a good sound quality you should adjust the volume
of your amplifi ed audio source (ipod, MP3, DVD, etc.)
between 50% to 70% level.
10 10
2. Connect a microphone to the input jack labeled MIC IN through
the 6.3 mm plug or Cannon plug.
4. Power all the devices on. A green LED indicator light will
illuminate indicating that the speaker is powered on.
ON