Powersmart DB8621S Manual Del Usuario página 10

ATTACH LOWER & UPPER HANDLE
1. Take lower handle and line up the hole in the lower handle with the hole on the handle bracket. Make
sure Left lower handle to left side of the mower, Right lower handle to right side of mower.
2. Secure the lower handle with Sleeve with provided M6 Hexagonal flange bolts on each side.
3. Pull upper handle up and lock it in position with bolts and knob on both sides. Make sure engine
star/stop control is on top.
4. Lock the cable to the handle using cable clip
5. Insert the recoil starter handle cable into the hook provided on the upper handle. You must engage the
start/stop control to release the recoil starter handle.
flange bolt
M6
Knob and screw
Cable Clip
Recoil starter handle
10