Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
•
Do not damage the cables when folding or unfolding the handle.
•
If a cable is damaged, contact an Authorized Service Dealer.
1a. Installing upper handle:
•
Place the mower upright in vertical position.
•
Remove the packing material from the cable.
•
Remove the rubber edge guard from the lower han-
dle (C).
•
Insert the upper handle (B) into the lower handle
(C). Insert the handle bolts (AA) and tighten with
the handle nuts (BB), using a Phillips head screw-
driver (not included).
•
Repeat for both sides.
Note: Do not damage the cable while installing the
upper handle.
1b. Unfolding and adjusting handle
•
Pull up on the handle holes (L) to release the
handles.
•
Fold the handles up until the handle pins (M) lock
into position.
Note: Ensure both handle pins are set at the same
position for proper assembly.
1a
AA
Rubber edge
guard
1b
14
B
BB
C
M
Publicidad
Capítulos
Tabla de contenido
