FITFIU FITNESS BELI-100 Manual De Usuario página 46

STEP 4
You can easily change your handlebar (# 7L, # 7R) between the double action mode
and the fixed mode during your workout.
DUAL ACTION MODE
To allow the handlebars to move along with the pedals, attach them to the coupler bars.
Select a height setting that is comfortable to the user, and make sure that both
handlebars are adjusted to the same height. Lock each handlebar in place with a bolt
(# 17), then put the protective cap (# 54) up to the end of the knob (# 17). See Step 4.
FIXED MODE
To keep the handlebars stationary, attach them on the main frame tubing between
the coupler bars.
STEP 5
1. Connect the console sensor wire (NO26) to the console (# 50).
2. Then insert the console (# 50) to the monitor bracket.
STEP 3
Connect the pedal (# 11) to the pedal tubing (#
6L & R). Use four M10X45 bolts (# 44) and four
M10 nuts (# 45).
46