Remote Control Operation
REV
During DVD or CD/VCD playback, press <REV> once to
play the previous chapter, title or track.
During DVD or CD/VCD playback, press and hold <REV>
to scan in reverse.
The player will review the disc at 2, 4, 8,16and 32 times
Normal speed as follows:
X16
X32
Press <PLAY> to resume normal playback.
During DVD or CD/VCD playback, press <FWD> once to
play the next chapter, title or track.
During DVD or CD/VCD playback, press and hold <FWD>
to scan forward. The player will review
The disc at 2, 4, 8,16and 32 times normal speed as follows:
X16
X32
Press <PLAY> to resume normal playback.
PREV
Press <PREV> to skip to previous chapter or track.
NEXT
Press <NEXT> to skip to next chapter or track.
MENU
During DVD playback , press <MENU>
to return to the program menu.
In the Setup Menu, press <MENU> to return to the main
menu or stop mode.
Any time, press <MENU> to cancel the current OSD or
some menus.
Note: This function is subject to the disc.
TITLE
During DVD playback, press <TITLE> to display the DVD
title menu or play the first title.
Note: This function is subject to the disc.
A-B
During playback, press <A-B> to select point A.
Press it again to select point B. The player will repeat the
section from A to B automatically.
Press <A-B> third time to cancel A-B repeat and clear points
A and B.
Note: 1. During CD playback, points A and B must
be within the same track.During DVD playback, points
A and B can be selected from different chapters.
2. This function is subject to the disc.
All manuals and user guides at all-guides.com
Advanced Features
REPEAT
Press <REPEAT> to select Repeat Title, Repeat chapter,
Repeat off during DVD playback.
Press REPEAT to select Repeat Single, Repeat All and
Repeat off when PBC is off ( CD).
ANGLE
During DVD playback
Press <ANGLE> to view scenes from different camera angles.
Press <ANGLE> repeatedly to change from one camera
angle to another.
Note: This function is disc specific.
ZOOM
During DVD playback, press <ZOOM> to
magnify the image as follows:
ZOOM1
ZOOM2
ZOOM4
TIME
Notes:
1.Time searches for an exact time in the movie.
2.In Title/Chapter mode, you cannot select value outside the range of the
total number of titles or chapters.
3.For some DVD discs, the Search function is unavailable.
Use the number keys to input the desired Time, Title or Chapter,
then press <ENTER> to confirm.Press <TIME > again, to exit goto
menu.
PROG
In stop mode,press <PROG> to display the [Program] submenu:
Input the track numbers in the order you would like
them to play. When finished, select [PLAY] and then
press <ENTER> to play the tracks in the new
programmed order. Select [CLEAR] and press
<ENTER> to clear all the numbers you have input.
Input the title number and the chapter number in the
desired order. Then select [PLAY] and then press
<ENTER> to play the chapters in the order you have
set. Select [CLEAR] and press <ENTER> to clear all
the numbers you have input.
14
Basic Operation
Using the remote control
Point the remote control at the remote sensor.
(The pictures below are for reference only.)
A B
-
REPEAT
L/R
SLOW
7m
POWER
OPEN CLOSE
/
SUBTITLE
ANGLE
LANGUAGE
VIDEO PROGRAM
+10
N P
/
MUTE
TIME
OSD
SETUP
TITLE
Basic Playback
Remarks: Do not expose the remote sensor of the
DVD Player to a strong light source, such as direct
sunlight.
Notes:
Point the remote control directly at the
player's remote sensor.
Do not leave the remote control in an
extremely hot or humid place.
Do not spill water or put anything wet
on the remote control.
Battery life is 1 year under normal
conditions.
15