Ecco REFLEX 5590 Serie Instrucciones De Instalación Y Funcionamiento

5590 Series - Reflex™ LED Minibars provide a compact yet powerful warn-
ing solution that offers the flexibility of either permanent, magnet mount or
vacuum-magnet mounting. All models feature 12-24 VDC operation and
combine discrete optics with LED reflector technology to maximize light
output, offering multiple flash patterns including double, quad, quint, rotate
and random. 5597 models have no lens optics, distributing light directly
from the corner LED reflectors while 5590 models feature lenticular lens
optics to provide more diffused light dispersion to the side of the vehicle.
Front and rear facing discrete optics on both models provide focused, long
range warning ideal for highway applications.
!
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property damage, serious injury, and/or death to
those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety information
contained
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure
the safety of you and those you are seeking to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing,
which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output performance of the
system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing
eye contact with the roadway.
5. Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air bag deployment
area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal injury or death. Refer to the
vehicle owner's manual for the air bag deployment area. It is the responsibility of the user/operator to determine a suitable mounting location
ensuring the safety of all passengers inside the vehicle particularly avoiding areas of potential head impact.
6. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle operator
should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people,
vehicles or other obstructions.
7. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal. Never take the right-
of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, driving against traffic, respond-
ing at a high rate of speed, or walking on or around traffic lanes.
8. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding
warning signal devices. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer as-
sumes no liability for any loss resulting from the use of this warning device.
Specifications:
Size: 5590XXX
5590XXX-VM
5590XXX-MG
5597XXX
5597XXX-VM
5597XXX-MG
Weight: Permanent mount
Vacuum-Magnet Mount
Magnet Mount
Input Voltage: 12 to 24 VDC systems
Installation & Mounting:
Important! This unit is a safety device, and it must be connected to
its own separate, fused power point to assure its continued opera-
tion should any other electrical accessory fail.
Carefully remove the Minibar and place it on a flat surface. Examine the
unit for transit damage, and locate all parts. If damage is found, or parts
are missing, contact the transit company or ECCO. Do not use damaged or
broken parts.
!
Caution! When drilling into any vehicle surface, make
sure that the area is free from any electrical wires, fuel lines, vehicle
upholstery, etc. that could be damaged.
Installation and Operation Instructions
5590 Series LED Minibars
15" x 9" x 2.5"
15" x 9" x 3.1"
15" x 9" x 2.7"
15" x 9" x 2.5"
15" x 9" x 3.1"
15" x 9" x 2.7"
approx. 4.0 lbs.
approx. 6.3 lbs.
approx. 6.25 lbs.
Current Draw:
Maximum power consumption:
5590/5597: 6.0 Amps Maximum
Maximum power consumption: 84 watts
Flash Rate:
See Flash Pattern Chart
Temp. Range: -30ºC to +50ºC
Page 1 of 12