Electrical Wiring Diagram - Fanaway FRASER Manual De Instrucciones

Fanaway Fraser Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections.
8 | P a g e

ELECTRICAL WIRING DIAGRAM

(black) to receiver input wire (black, AC IN L) as
shown in Fig. 11.
wire (white) to the receiver input wire (white, AC
IN N).
the fan bracket ground wire (green) and fan body
ground wire.
TO MOTOR L) to motor live input wire (black, TO
MOTOR L).
TO MOTOR N) to motor neutral input wire (white,
TO MOTOR N)
Fig. 11
FOR LIGHT) to fan light live input wire (blue,
FOR LIGHT)
them apart so that the green and white wires are
on one side of the outlet box and the black and
blue wires are on the other side.
push the wiring into the outlet box.
9. Carefully insert the Remote Receiver above
the hanger ball in the remainder spacing in the
mounting bracket. Take care not to damage or
loosen any of the wiring.
1. Connect the household live supply wire
2. Connect the household neutral supply
3. Connect the household ground wire to
4. Connect the reveiver output wire (black,
5. Connect the receiver output wire (white,
6. Connect the receiver output wire (blue,
7. After connecting the wires, spread
8. Turn the connecting nuts upward and
V e r s i o n 1 . 0
F R A S E R
1 2 / 2 0 1 9