Unpacking The Appliance; Scope Of Delivery; Control Panel; Remote Control - BOMANN CL 6049 CB Manual De Instrucciones

WARNING:
• Non-rechargeable batteries are not to be recharged.
• Ensure correct polarity when inserting the battery / batteries.
CAUTION:
• When not using the remote control for a long period of time, remove
the batteries in order to prevent "leakage" of battery acid.
• Different battery types or new and used batteries must not be used
together.
• Do not dispose of batteries along with domestic waste. Return used
batteries to the relevant collection facilities or your retailer.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all the packaging material such as plastic bags, filler mate-
rial, cable ties and cardboard packaging.
3. Check that all parts are supplied in the package.

Scope of Delivery

1 Air conditioning appliance

1 Remote control

2 Batteries
1 Flexible exhaust pipe
1 Exhaust pipe adapter (Connection on the appliance)
1 Window kit, 2-piece
1 Adapter for the window exhaust kit
1 Water hose
2 Plugs (spares)
Overview of the Components
1 Display on the front
2 Air outlet (pivoting flap)
3 Control panel with display
4 Housing
5 Handle
6 Water outlet
7 Exhaust pipe connector
8 Winding device for power cord
9 Mains cable
10 Water outlet
11 Exhaust pipe adapter
12 Window kit, 2-piece
13 Remote control
14 Flexible exhaust pipe
15 Adapter for the window exhaust kit
16 Grid on the air intake
17 Filter insert
18 Power plug bracket
Overview of Buttons, Icons and Indicator Lights

Control Panel

1 FAN indicator light (fan)
2 COOL indicator light (cooling)
3 DRY indicator light (dehumidifying)
4 Display
5 HIGH indicator light (high fan speed)
6 LOW indicator light (low fan speed)
7 POWER indicator light
8 WATER FULL indicator light (water tank full)
9 POWER button (switch appliance on / off)
10 SPEED button (set fan speed)
42
CL6049CB_IM
11 and buttons (adjust temperature or hour)
12 SLEEP indicator light (sleep mode)
13 SLEEP button (set "sleep mode")
14 MODE button (set operating mode)
15 LIGHT button (switch the display in the front of the appliance on
or off)
16 LIGHT indicator light (display at the front of the appliance)
17 TIMER button (set timer)
18 TIMER indicator light (timer operation enabled)
Remote Control
1 MODE button (set operating mode)
2 TIMER button (set timer)
3 POWER button (switch appliance on / off)
4 TEMP+ TEMP- buttons (adjust temperature or hour)
5 SLEEP button (set "sleep mode")
6 SPEED button (set fan speed)

Notes for Use

CAUTION: Important for initial operation or after transport!
Before initial operation, the appliance must stay in an upright position
for at least 3 hours in order for the cooling agent to sink. The compres-
sor will be damaged otherwise.
CAUTION:
• When you interrupt the operation with the POWER
for at least 3 minutes before switching the appliance on again.
• If you want to move the appliance to another location, first empty
the water tank!
• The appliance operates most effectively with a room size up to 70 m³.
• The flexible exhaust hose and the adapter have been manufactured
especially for this appliance. In order to avoid incorrect operation, do
not replace the pipe with another pipe.
• The exhaust pipe can be extended up to 150 cm. Do not use any
extension.
• Ensure free airflow. Make sure not to kink or bend the exhaust pipe.
Any blockage can cause the appliance to overheat.
• Close all windows and doors in order to prevent outside air from
entering the room and thus allowing a more effective operation of the
appliance.

Putting into Service

Location

• When installing the appliance, make sure to keep a distance of at
least 50 cm between the appliance and any walls or other objects.
• The surface must be flat and dry.

Assembly of Exhaust Pipe

NOTE:
For sliding windows or external roller blinds you may use the supplied
window exhaust air kit in a vertical or horizontal orientation. Adjust the
length of the seal plate as desired.
1. Connect the adapter to the exhaust hose. Place the exhaust hose in
a way that the first fin of the hose lays in the rail. Tighten the adapter
by turning it clockwise.
2. Connect the adapter to the connector on the back of the appliance. To
do this, push the adapter from the right into the guides until it stops.
3. Extend the pipe to the desired length.
4. Screw the window exhaust air kit adapter onto the end of the exhaust
air hose.
button, wait
09.12.20