Power Supply; Using The Microphone - Bontempi Toy Band Star iGirl 40 1042 Libro De Instrucciones

E N G L I S H

POWER SUPPLY

Use a screwdriver to open the battery com-
partment. Insert 3 x
1.5V batteries R6/AA
(not supplied), ensu-
ring correct polarity.
Re-fit battery cover.
Replace batteries when
the quality of sound
becomes bad. Use alkaline batteries to obtain a
longer duration.
ATTENTION - BATTERY CARE:
• Non-rechargeable batteries are NOT to be recharged. •
Rechargeable batteries must be removed from the pro-
duct before being charged. • Rechargeable batteries are
only to be charged under adult supervision. • Different
types of batteries or new and old batteries are not to be
mixed. • Use only batteries of the same or equivalent
type. • Batteries are to be inserted with correct polarity. •
Remove exhausted batteries to prevent leakage. • Do not
short circuit supply terminals. • Remove batteries during
long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items
mentioned here below, please refer to Council
Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES - Protect the
environment by disposing of batteries
in the special containers provided for
this use.
2. PACKAGING DISPOSAL - Take the paper, cardboard and
corrugated board to the appropriate waste collection
centres. Plastic material must be placed in the relevant
collection containers.
The symbols indicating the various types of plastic are:
01 02 03
PET PE PVC
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene,
code 02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride
• PP= Polypropylene • PS= Polystyrene, Polystyrene foam
• O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES - The wheelie
bin symbol with a cross indicates that the product must
not be disposed of in the domestic waste at the end of
05 06 07
PP PS O
its useful life. Instead, it should be taken to
your nearest designated collection point or
recycling facility. Alternatively, check with your
retailer and return the product when buying a
replacement, on a one-to-one basis or as free
of charge in case the size is smaller than 25cm.
Appropriate disposal promotes the recycling of parts
and materials, as well as helping to protect the
environment and human health. Under current
legislation, strict penalties are enforced against those
disposing of products illegally. For more information
about the collection of special waste, contact your Local
Authority.

USING THE MICROPHONE

The instrument is switched on or off by pressing button
b
.
a
Press the button to listen to 12 musical pieces.
MP3
f
Press button
By pressing button
to 5 sound effects: Crowd sounds, trumpet, cricket
sounds, whistle and applauses.
By pressing button
rhythms.
MP3
f
Press button
You can adjust the general volume using the buttons
d
.
While a musical piece is playing, you can overlap a
sound effect or a drum rhythm.
HOW TO SING ALONG THE MUSIC
With the 3.5 mm jack cable
external audio source (MP3 player, iPod, smartphone,
etc., not supplied) to the stage microphone.
1. Connect the microphone cable
2. Insert the end of the cable jack 3,5 mm
"HEADPHONE" socket
other audio source.
MP3
f
3. Press button
4. Turn on the player, find a song from your playlist and
start playing it. You can now listen to the song from
the stage microphone.
N.B.: While a song is playing, you can sing over it.
5. Adjust the volume to balance the voice with the
music; the reproduction will be monophonic because
of the instrument.
to interrupt the track.
c
in sequence, you can listen
e
you can listen to 5 drum
to interrupt the rhythm.
i
you can connect an
g h
to the plug
i
into the
j
of your music player or
to activate the music player.
.
1