OPERATION
Turn on the power and check operation of the fan. The fan is controlled by the use of the pull chain as follows:
1
one pull = high speed
two pulls = medium speed
three pulls = low speed
four pulls = off
For proper functions, ensure that the chain is pulled down fully and released each time.
2
NOTE: Leave pull chain switch in "high speed" position when using optional controls.
The slide switch on the side of the switch housing controls forward or reverse rotation.
3
forward and reverse positions.
IMPORTANT: To prevent damage or cause injury, be sure that fan is switched to off and blades have stopped moving completely
4
before attempting to change direction of rotation.
Summer Mode and Winter Mode Operation:
The reverse switch is located on the surface of the switch housing. Slide the switch to the right for winter mode operation. Slide the
5
switch to the left for summer mode operation.
Summer Mode (forward):
6
A DOWNWARD airflow creates a cooling effect as shown in Figure 1. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Winter Mode (Reverse):
7
An UPWARD airflow moves warmer air off the ceiling area as shown in Figure 2. This allows you to set your heating unit on a coole r
setting without affecting your comfort.
SUMMER MODE
(COUNTERCLOCKWISE DIRECTION)
Fig. 1
Make sure switch is not stuck between
WINTER MODE
(CLOCKWISE DIRECTION)
Fig. 2
©2019 Hinkley Lighting, Inc.
| hinkley.com |
13