Channel Select; Footswitch - Fender Frontman 65R Instrucciones De Funcionamiento

Your new Frontman 65R amplifier delivers world–class
Fender ® tone and world–standard Fender ® quality:
• 65W output power into 8 ohms
• Selectable Normal and
independent volume and tone controls
• MID-CONTOUR button furnishes many different
1 2
variations in distortion—from Rock to Blues to Metal
to whatever!
INPUTS
VOLUME TREBLE MID
• Classic Fender ® spring Reverb
1 2
INPUTS
VOLUME TREBLE
A. INPUT - Plug your guitar in here.
normal sensitivity for most guitars, INPUT 2 is
lower sensitivity for guitars with high output (active)
pickups.
B. VOLUME - Adjusts the loudness of the Normal
channel.
C. TREBLE/BASS - Adjusts the high- and low-frequency
tones of the Normal channel.
D. DRIVE - Adjusts the distortion level in the Drive
channel. Use together with VOLUME-{F} to adjust
the overall loudness of the Drive channel.
E. CHANNEL INDICATOR -
LED OFF Normal channel is active
n
LED ON Drive channel is active
Ôn
F. VOLUME - Adjusts the loudness of the Drive channel
together with DRIVE {D}.
G. CHANNEL SELECT -
Button OUT selects the Normal channel
Button IN
H. TREBLE/MID/BASS - Adjusts the high-, middle-,
and low-frequency tones of the Drive channel.
I. MID-CONTOUR - Activates a "scooped" midrange
EQ useful for modern distortion sounds in the Drive
channel.
J. REVERB - Adjusts the Reverb level for both
channels.
6
frontman™ 65r amplifier
Drive channels with
CH SELECT MORE DRIVE
BASS DRIVE VOLUME
CH SELECT
BASS DRIVE VOLUME
INPUT 1 is
selects the Drive channel
f e n d e r . c o m
• Fender ® "touch-sensitive" circuit design simulates
the feel of tube distortion
• PRE-AMP OUT and POWER-AMP IN jacks allow you
to connect external effects devices, other amplifiers or
sound/recording equipment to your FM 65R
• FOOTSWITCH jack for use with the 1-button Fender ®
footswitch (included). The footswitch provides remote
channel selection
MID
CONTOUR
TREBLE MID BASS REVERB SWITCH
Thank you for choosing Fender ® —The World's most
popular instrument amplifiers—since 1946
MID
CONTOUR
TREBLE MID BASS REVERB
K. FOOTSWITCH - Connect the 1-button Fender ®
footswitch (included) at this jack to enable remote
channel selection. When plugged in, the footswitch
overrides the CH SELECT button.
L. PRE OUT/PWR IN - (1) Effects Loop - Connect PRE
OUT to an effects device input, then connect the
effects device output to PWR IN. (2) Multiple Amps
- Connect the primary unit's PRE OUT to the auxiliary
unit's PWR IN. The primary unit is used to control
all auxiliary amps. (3)‑Recording or Reinforcement
- Connect PRE OUT to sound equipment's input.
Both jacks use a TS (Tip-Sleeve) standard
type plug for connections. PRE OUT includes
onboard tone shaping.
M. POWER INDICATOR - Lights up when the amplifier
is on.
N. POWER - Switches the amplifier on
and off.
O. POWER CORD SOCKET - Connect
the included power supply cord in
accordance with the voltage and
frequency ratings listed on the rear
panel of your amplifier.
FOOT PRE PWR
OUT IN
FOOT PRE PWR
SWITCH OUT IN
F E N D E R M U S I C A L I N S T R U M E N T S
F E N D E R M U S I C A L I N S T R U M E N T S