HUBER INSTRUMENTE HM35 Manual De Instrucciones página 39

Key
Display Filter
Auto-Off
Auto-Zero
Beep
Lighting
▲
▼ IR Interface
Average period
Date & Time
dd.mm.yyyy
hh:mm:ss
Calibration
History
Manual re-calibration
Note
1) With the filter function active, short-term measurement variations should be
suppressed, resulting in a steadier display. Measured values via the interface and in
the Data Logging Memory will not be filtered.
On
Off
3 min
10 min
60 min
On
Off
On
Off
Off
Level 1
Level 2
Level 3
On
Off
10 s
30 s
1 min
2 min
5 min
10 min
30 min
1 h
3 h
6 h
12 h
24 h
user
42
Notes
Filters the display values 1)
Auto. switch-off
Sensor auto-zeros at switch-on
if measured value < 1% FS
Warning beeper
Only Level 1 possible for Ex-models
At switch-on, the automatic
connection to the PC is activated for
2 minutes
Automatic connection is de-activated
Time period for average value
Set with ▲/▼/EDIT/OK
Set with ▲/▼/ EDIT/OK
Set with ▲/▼/ EDIT/OK
Displays the last calibration date
Manual re-calibration of the zero
point and limit value