7�2 Initial Start-Up; 7�3 Starting Use - Beurer DM 20 Instrucciones De Uso

Note
If the LED display lights up red twice, you have to replace the batteries�
7.2 Initial start-up
Note
Carry out initial start-up before first use� Without initial start-up, the drink manager cannot be used� You have to
carry out initial start-up after each time you replace the batteries�
Keep the smartphone close to the drink manager in order to maintain an active Bluetooth
initial use�
1� Activate Bluetooth
®
2� Download the free "beurer HealthManager" app from the Apple App Store (iOS) or from Google Play
(Android )�
TM
3� Open the "beurer HealthManager" app and add the drink manager in the app settings�
4� Press and hold the Bluetooth
manager starts to flash blue�
5� The drink manager synchronises with the "beurer HealthManager" app� During synchronisation, the LED
display on the drink manager lights up blue continuously�
6� Once the synchronisation is complete, the blue LED display on the drink manager goes out�
7.3 Starting use
1� To switch on the drink manager, press and hold the ON/OFF/cup button for 3 seconds� The LED display
lights up red during calibration of the drink manager� Do not touch the drink man-
ager until the LED display goes out and you hear the acoustic signal�
2� Press the ON/OFF/cup button� The LED display starts to flash white�
3� Place your desired drink container (e�g� glass, cup or beaker) in the centre of the
drink manager surface� Make sure that the drink container is completely full� Once
the drink container has been registered, the white LED display goes out�
4� If you now drink from the drink container and then place it back on the surface
of the device, the drink manager automatically records the volume that has been
drunk and the white LED display lights up briefly�
on your smartphone�
button on the drink manager for 3 seconds� The LED display on the drink
®
20
connection during
®