Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Conductor size (mm
2
)
Cable rating (Amperes)
0.75
6
1.00
10
1.50
15
2.50
20
4.00
25
Cable length (m)
7.5
Voltage
Amperes
Cable rating (Amperes)
115
0 - 2.0
6
2.1 - 3.4
6
3.5 - 5.0
6
5.1 - 7.0
10
7.1 - 12.0
15
12.1 - 20.0
20
230
0 - 2.0
6
2.1 - 3.4
6
3.5 - 5.0
6
5.1 - 7.0
10
7.1 - 12.0
15
12.1 - 20.0
20
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Inserting and removing a bit (fig. A)
• Align the pilot hole (6) in the chuck (1) with an
opening in the chuck guard (7).
• Insert the chuck key into the pilot hole (6).
• Open the chuck jaws (8) by turning
counterclockwise.
• Insert the shank of a bit into the chuck.
• Tighten the chuck using all three holes.
• To remove the bit, proceed in reverse order.
Chuck key holder (fig. D)
Your Elu heavy duty right angle drill is supplied with
a chuck key holder.
• Fit the chuck key (5) to the chuck key holder (4)
as shown.
Instructions for use
Always observe the safety instructions
and applicable regulations.
13
15
25
30
45
60
6
6
6
6
10
6
6
6
15
15
6
10
15
20
20
10
15
20
20
25
15
20
25
25
-
20
25
-
-
-
6
6
6
6
6
6
6
6
6
6
6
6
6
10
15
10
10
10
15
15
15
15
15
20
20
20
20
20
25
-
Prior to operation:
• Insert the appropriate bit.
• Mark the spot where the hole is to be drilled.
Switching on and off (fig. A)
• To run the tool, press the paddle switch (2).
• To stop the tool, release the paddle switch.
Tool handling (fig. B)
Thanks to the paddle switch the drill can be used in
various positions as illustrated for optimum control
and comfort.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your Elu Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Chuck removal (fig. C)
• Insert the straight end of the chuck key handle
into the chuck (1).
• Strike the key (5) sharply in a counterclockwise
direction using a wooden mallet or similar object
to loosen the chuck.
• Unscrew the chuck by hand.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an Elu authorized repair agent
where it will be disposed of in an environmentally
safe way.
E N G L I S H
en - 4
Publicidad
Tabla de contenido
