Sauder 423408 Manual Del Usuario página 7

Step 5
NOTE: Be sure the BRACE (D) surface without HIDDEN CAMS is positioned
å
as shown.
Fasten the BOTTOM (C) to the ENDS (A). Use four SILVER 1-1/2" FLAT HEAD
å
SCREWS (9).
Fasten two CASTERS (4) to the BOTTOM (C) as shown. Use ten SILVER 7/16"
å
PAN HEAD SCREWS (10).
Fasten two LOCKING CASTERS (5) to the BOTTOM (C). Use ten SILVER 7/16"
å
PAN HEAD SCREWS (10).
4
SILVER 1-1/2" FLAT HEAD SCREW
A
423408
(4 used for the BOTTOM)
D
www.sauder.com
4
9
C
SILVER 7/16" PAN HEAD SCREW
(20 used for the CASTERS)
All edges with
three holes should
be facing in.
A
5
10
Page 7