Functional Description - Makita 9005B Manual De Instrucciones

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Shaft lock
1
001024
CAUTION:
Never actuate the shaft lock when the spindle is
•
moving. The tool may be damaged.
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and returns
to the "OFF" position when released.
1
2
007353
For Model 9005B
CAUTION:
Switch can be locked in "ON" position for ease of
•
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop. For continuous operation, pull
the switch trigger and then push in the lock button. To
stop the tool from the locked position, pull the switch
trigger fully, then release it.
All manuals and user guides at all-guides.com
For Model 9005BY
To prevent the switch trigger from accidentally pulled, a
lock-off button is provided. To start the tool, press in the
lock-off button and pull the switch trigger. Release the
switch trigger to stop.
For Model 9005BZ
1. Shaft lock
001045
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
ASSEMBLY
•
Installing side grip (handle)
•
1. Trigger
2. Lock button /
Lock-off button
001055
Screw the side grip securely on the position of the tool as
shown in the figure.
Installing or removing wheel guard (For
depressed center wheel , multi disc / abrasive
cut-off wheel , diamond wheel)
•
5
1
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
CAUTION:
Always be sure that the side grip is installed
securely before operation.
CAUTION:
When using a depressed
wheel/Multi-disc, wire wheel brush or cut-off wheel,
the wheel guard must be fitted on the tool so that
the closed side of the guard always points toward
the operator.
1. Switch trigger
center grinding