Service Information - Black+Decker LHT2220 Manual De Instrucciones

WARNING:
remove battery pack before
servicing, cleaning or removing material from the
gardening appliance.
The cutting blades are made from high quality,
hardened steel and with normal usage, they will not
require resharpening. However, if you accidentally
hit a wire fence (figure 9), stones, glass or other
hard objects, you may put a nick in the blade. There
is no need to remove this nick as long as it does not
interfere with the movement of the blade. If it does
interfere, remove the battery and use a fine toothed file or sharpening
stone to remove the nick. If you drop the trimmer, carefully inspect it
for damage. If the blade is bent, housing cracked, or handles broken or
if you see any other condition that may affect the trimmer's operation
contact your local Black+Decker Service center for repairs before
putting it back into use.
Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of metals. Do not store the unit on or adjacent
to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to
clean the unit. Never let any liquid get inside the unit; never immerse
any part of the unit into a liquid. Prevent the blades from rusting by
applying a film of light machine oil after cleaning.
This class B digital apparatus complies with canadian IceS-003.
This device complies with part 15 of the Fcc rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the Fcc rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
9
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. This class B digital apparatus complies with canadian IceS-003.
WARNING:
DO NOT use the hedge trimmer with any type of
accessory or attachment. Such usage might be hazardous.

SERVICE INFORmATION

Black+Decker offers a full network of company-owned
and authorized service locations throughout North america. all
Black+Decker Service centers are staffed with trained personnel
to provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black+Decker location nearest
you. To find your local service location, call:1-800-544-6986.
THE RbRC™ SEAL
The rBrc™ (rechargeable Battery recycling corporation)
Seal on the lithium Ion battery (or battery pack) indicates
that the costs to recycle the battery (or battery pack) at the
end of its useful life have already been paid by bLACk+DECkER.
rBrc™ in cooperation with bLACk+DECkER and other battery
users, has established programs in the United States to facilitate the
collection of spent lithium Ion batteries. Help protect our environment
and conserve natural resources by returning the spent lithium Ion
9
ACCESSORIES