Pre-Installation Checklist - GE CP650 Instrucciones De Instalación

PRE-INSTALLATION CHECKLIST

WARNINg –
the cooktop supply line must be shut off while
connections are being made. failure to do so
could result in serious injury or death.
When preparing cooktop opening, make sure
A
the inside of the cabinet and the cooktop do
not interfere with each other. (See section on
preparing the opening.)
Remove packaging materials and literature
B
package from the cooktop before beginning
installation.
Styrofoam
Packaging
Cooktop
Installation Instructions
The electrical power to
Literature
Package
Remove Installation Instructions from
C
literature pack and read them carefully before
you begin.
Be sure to place all literature, Owner's Manual,
Installations, etc. in a safe place for future
reference.
D Make sure you have all the tools and materials
you need before starting the installation of the
cooktop.
Your home must provide the adequate
E
electrical service needed to safely and
properly use your cooktop. (Refer to section on
electrical requirements.)
When installing your cooktop in your home,
f
make sure all local codes and ordinances are
followed exactly as stated.
g Make sure the wall coverings, countertop and
cabinets around the cooktop can withstand
heat (up to 200°F) generated by the cooktop.
3