Introduction Of Advanced Built-In Cd Player Operation; Repeating Play; Playing Tracks In A Random Order - Pioneer SUPER TUNER III DEH-P7450MP Manual De Operación

Built-in CD Player
Introduction of advanced built-in
CD player operation
1
1
display
FUNCTION
Shows the function status.
Press to display the function
FUNCTION
names.
Press repeatedly to switch between
FUNCTION
the following functions:
(repeat play)—
RPT RDM
(scan play)—
T.SCAN PAUSE
• To return to the playback display, press
.
BAND/ESC
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
(random play)—
(pause)

Repeating play

Repeat play lets you hear the same track over
again.
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 5 to turn repeat play on.
appears in the display. The track
Repeat :ON
presently playing will play and then repeat.
3 Press ∞ to turn repeat play off.
appears in the display. The track
Repeat :OFF
presently playing will continue to play and then
play the next track.
Note
• If you perform track search or fast
forward/reverse, repeat play is automatically
cancelled.

Playing tracks in a random order

Random play lets you play back tracks on the
CD in a random order.
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 5 to turn random play on.
appears in the display. Tracks will
Random :ON
play in a random order.
3 Press ∞ to turn random play off.
appears in the display. Tracks will
Random :OFF
continue to play in order.
.
RPT
appears in the
Repeat
.
RDM
appears in the
Random
En
Section
04
15