Fully Programmable Via Gpib, Rs232 Or Usb - TTI QL Serie Manual De Instrucciones

Fully Programmable via GPIB, RS232 or USB

The QL355P and QL564P incorporate a full bus interface permitting remote control and readback via
either GPIB (IEEE-488), RS232 or USB.
The GPIB interface conforms fully with IEEE-488.2 and IEEE-488.1.
The serial interface can be used as a conventional RS232 interface or as part of a multi-instrument
ARC system (Addressable RS232 Chain).
USB represents the future for medium speed PC connectivity. By adding USB hubs, multiple devices
can be connected. A Windows device driver is supplied which creates a virtual COM port, enabling
USB to be used with applications that do not directly support it.
QL series supplies use simple and consistent command structures which make programming
particularly easy regardless of which interface is used.
A National Instruments LabWindows* device driver is available.
All power supply settings can be controlled via the bus. Voltage and current can be set to a resolution
of 1mV or 0·1mA. Actual voltage and current can be read back together with the power supply status.
* LabWindows is a trademark of National Instruments Corp.
13