Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CYCLE MODIFIER
BUTTONS
Each cycle has default
settings that are selected
automatically.
You may also customize these settings
using the cycle modifier
buttons. Press the button for the
desired modifier
until the indicator
light for the desired
value is lit. The washer automatically
adjusts the water
level for the type and size of wash load for best results
and maximum
efficiency.
Due to the high-efficiency
nature of this product, water levels may be much lower
than expected.
This is normal operation
and cleaning/
rinsing performance
will not be compromised.
NOTE: To protect your garments, not every wash
temperature,
spin speed, soil level, or option is available
with every cycle. A chime will sound and the LED will not
light if a selection is not allowed.
[Washmemp
[S0inSpee l
[
Atl CoId
Rinses
Soil Level
Chime
O
WASH TEMP
Wash Temp selects the wash and rinse temperature
combination
for the selected cycle. Press the Wash
Temp button until the indicator
light for the desired
setting is lit.
*Select the water temperature
suitable for the type
of load you are washing. Follow the garment fabric
care labels for best results.
• Warm rinses are regulated at approximately
86°F (30°C).
• Warm rinses leave the clothes dryer than
cold rinses, but will result in increased energy
consumption
and greater wrinkling
of clothes.
• Cold rinses use less energy. The actual rinse
temperature
depends on the temperature
of the
cold water at the faucet.
O
SPIN SPEED
0
0
Higher spin speeds extract more water from clothes,
reducing drying time and saving energy.
Press the SPIN SPEED button until the desired speed
is selected. Some fabrics, such as delicates,
require
a slower spin speed. To protect your clothing,
not all
spin speeds are available
for all cycles.
The Drain & Spin cycle:
1. Press the POWER button to turn ON the washer.
2. Press the SPIN SPEED button to select the desired
spin speed. For drain only, select the
NO SPIN option.
3. Press the START/PAUSE button. The water will
drain and the clothes will tumble before
the spin routine begins.
SOIL LEVEL
Adjusting
the soil level setting will modify
the cycle
to allow more time for heavily soiled clothes or less
time for lightly soiled clothes. Press the SOIL LEVEL
button until the desired soil level is selected.
CHIME
Press repeatedly
to adjust the volume of the chime
and keypad tones. You may turn the end-of-cycle
chime and keypad tones ON or OFF with the CHIME
button.
2O
Publicidad
Tabla de contenido
