Pando PRO 520 Manual De Instalación página 17

INOXPAN S.L.
EN - SAFETY INSTRUCTIONS
- Once the appliance has been delivered, within 24h, remove the packaging and check
that it is in good state, visually inspecting the general state of the outside. If any
anomaly or damage is observed, do not install and immediately inform the dealer or
installer within 24h of reception.
- This hood has been designed for normal domestic use. It must not be used for
industrial, professional, or any other use different from what it has been designed
for.
- Pando will not be held liable for consequences or damages resulting from incorrect
installation or misuse of the appliance.
- Do not try to alter any of the characteristics of this appliance, this could be dangerous
and will automatically render the guarantee void.
- It must be possible and accessible for the user to disconnect the appliance from the
mains after installation. The power plug should be easily accessible, if this is not the
case, a switch for electrical disconnection, compliant with electrical installation
regulations, must be fitted.
- Take special care when perforating walls or ceilings and ensure that there are no
hidden electrical cables, pipes, metal beams, etc., as perforating them could cause
great damage, short circuits or the transmission of noise and vibrations.
- IMPORTANT: Before connecting the appliance to the mains, make sure the current is
first turned off (differential or circuit breaker on the general electrical panel of the
house).
- Hood and conduit installation must comply with regulations on ventilation of closed
spaces. More specifically, the exhausted air must not be led through a conduit that is
used for exhausting fumes from other appliances using gas or other fuels (central
heating installations, etc.).
- Negative pressure in the premises must not exceed 0.04 mbar. This will allow the
hood to operate in optimum conditions. To achieve this, it is necessary to have a
permanent entry of fresh air to avoid air stagnation, it is recommended to have a
ventilation grille for this purpose. Doors and windows are not enough.