Sanycces CE3001 Manual De Instalación página 4

GB
Index
General guidelines
Warnings
Necessary tools
Components
Installation
Controls/function
Maintainence / Cleaning
Trouble shooting-common problems
Warranty certificate
General guidelines
Thank you for choosing us. Please read the instruction manual carefully before the installation and use of the product.
In the case of technical problems, doubts or to find out more about the validity and scope of the product guarantee, please contact our technical service.
Warnings
Installation have to be carried out by qualified personnel. If any component is damaged during the installation it is the installer's responsibility.
The company does not install any of the products in our catalogue although for the comfort of our clients we have a number of totally independent
collaborators (referred to for practical purposes as S.A.T.). These independent collaborators bill the client directly for their services (if the client decided to
contract their services through our company or other means), and are completely responsible for the work they do. The costs due to S.A.T. will only be met by
our company when it is acting as an AFTER-SALES SERVICE, in the case that the product is covered by a valid GUARANTEE after the verification and inspection
of a manufacturing fault, by the technical department of this company, indicating in detail, with the S.A.T. being equally responsible for its services.
The equipment should not be used by minors or by any person with disabilities without the supervision of an adult except if they receive appropriate
instructions, which enables them to use it in a safe manner and understand the dangers of incorrect use.
The company is not responsible for injuries caused by the incorrect use of its products, nor for products which have been modified or repaired by non-
authorized personnel. Any damage to components during installation is the responsibility of the technician/person installing the product.
Once the product has been unpacked, check it thoroughly.
To move the product, hold it by the sides and never by the hydromassage conduits.
Protect the acrylic surface during installation and avoid knocking the hydromassage in any way.
Required ceiling height > 2.30m. The surface or surfaces where the apparatus is to be installed should have the appropriate covering already in place and be
perfectly level and squared.
Check that the water system is working correctly. The first step before installation of the product equipped with our taps, is to purge the tubes. Incorrect
installation through the omission of this step will void the guarantee. The installer will be responsible for checking the hydraulic system. The minimum pres-
sure of water at the entrance should be (2,5 ∙ 105 Pa) and the maximum of 4 bars (4 ∙105 Pa). If it is over 4 bars it is advisable to install a pressure regulator to
avoid any damage to the product. The water heater necessary for this product to function correctly should produce 10 l/minute of water at 65ºC.
The company reserves the right to modify any of its products as well as the installation and users manuals of said products without any obligation to
forewarn or substitute.
Necessary tools
2
2
2
6
6
10
11
11
14
SW 6
2
Teflón